wuji-cli-upgrade

wuji upgrade fetches firmware from the official catalog, flashes it over the connected transport, and prints a per-device report. The device reboots into the new firmware automatically.

Mental Model: Scope × Action

Every invocation is a scope (which devices) combined with an action (what to do). Running wuji upgrade with no arguments prints help — flashing never happens implicitly.

Scope (defaults to the only connected device):

• --all — every discovered device (latest firmware only)
• --type <TYPE> — every device of one type (matches ping's Device Type, case-insensitive, e.g. --type wuji_glove)
• --sn / --address / --handedness — one device, same selectors as other commands

Actions:

• --check — update overview, read-only, works with any scope
• (no action flag) — upgrade the scoped devices to their latest catalog version
• --to <VERSION> — install a specific catalog version
• --file <PATH> — flash a local firmware file
• --list — browse the firmware catalog, read-only

A version only makes sense for one device type, so --to, --file, and --list require a single-type scope: --type or one device. --all always means "latest for each device".

Usage

wuji upgrade --check                        # Which devices have updates (read-only)
wuji upgrade --all                          # Upgrade every device to its latest
wuji upgrade --sn <SN>                      # Upgrade one device to its latest
wuji upgrade --sn <SN> --to 0.11.0          # Install a specific version
wuji upgrade --type wuji_glove --to 0.11.0   # Install a version on every glove
wuji upgrade --sn <SN> --list               # List firmware versions for one device
wuji upgrade --file fw.zip                  # Flash a local package

Without a device selector, single-device actions auto-pick the only connected device; if several are on the bus, the CLI errors out listing candidate SNs.

Safety Semantics

• Flashing always shows a confirmation prompt with firmware version, size, and the version transition for each device. -y / --yes skips it.
• A device already on the target version is skipped. Use --force to downgrade a device ahead of the latest catalog version.
• Downgrading to an older version via --to or --file is allowed; the confirmation prompt flags it with ⚠ DOWNGRADE.
• --file supports official .zip packages (verified automatically) and raw .bin files (flashed as-is).

Reading the Report

• Per-device Status: ok / skipped / failed; the Detail column carries the failure reason or skip note
• Exit code: 0 unless a device failed (skipped devices don't fail), directly usable in scripts
• --check exits 0 whether or not updates exist (only a query failure exits 1); gate on the JSON status field instead

Examples

wuji upgrade --check gives a read-only overview of all devices:

$ wuji upgrade --check
1/2 device(s) have updates available
┌──────────────────┬─────────────┬─────────┬────────┬──────────────────┐
│ SN               ┆ Device Type ┆ Current ┆ Latest ┆ Status           │
╞══════════════════╪═════════════╪═════════╪════════╪══════════════════╡
│ WG1KXXXXXXXXXX01 ┆ wuji_glove   ┆ 0.11.0  ┆ 0.11.1 ┆ update available │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┤
│ WG1KXXXXXXXXXX02 ┆ wuji_glove   ┆ 0.11.1  ┆ 0.11.1 ┆ up to date       │
└──────────────────┴─────────────┴─────────┴────────┴──────────────────┘

wuji upgrade --all confirms the plan, then flashes each device in turn and prints a report:

$ wuji upgrade --all
firmware: 0.11.1 (157.15 KiB, released 2026-06-24)
  - Fixed an incorrect IMU initialization warning.
device(s) to upgrade (2):
  WG1KXXXXXXXXXX01 (0.11.0 → 0.11.1)
  WG1KXXXXXXXXXX02 (0.11.0 → 0.11.1)
proceed? [y/N] y

2 upgraded (2 device(s))
┌──────────────────┬────────┬────────┬────────┬──────────┐
│ SN               ┆ Status ┆ Before ┆ After  ┆ Duration │
╞══════════════════╪════════╪════════╪════════╪══════════╡
│ WG1KXXXXXXXXXX01 ┆ ok     ┆ 0.11.0 ┆ 0.11.1 ┆ 16s      │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌┤
│ WG1KXXXXXXXXXX02 ┆ ok     ┆ 0.11.0 ┆ 0.11.1 ┆ 16s      │
└──────────────────┴────────┴────────┴────────┴──────────┘

Devices already on the target version are skipped, and the Detail column says why:

$ wuji upgrade --all --yes
0 upgraded, 2 skipped (2 device(s))
┌──────────────────┬─────────┬────────┬───────┬──────────┬─────────────────────┐
│ SN               ┆ Status  ┆ Before ┆ After ┆ Duration ┆ Detail              │
╞══════════════════╪═════════╪════════╪═══════╪══════════╪═════════════════════╡
│ WG1KXXXXXXXXXX02 ┆ skipped ┆ 0.11.1 ┆ -     ┆ -        ┆ already on 0.11.1   │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┤
│ WG1KXXXXXXXXXX01 ┆ skipped ┆ 0.11.1 ┆ -     ┆ -        ┆ already on 0.11.1   │
└──────────────────┴─────────┴────────┴───────┴──────────┴─────────────────────┘

Installing a version below the current one is flagged in the prompt:

$ wuji upgrade --sn WG1KXXXXXXXXXX01 --to 0.11.0
firmware: 0.11.0 (155.68 KiB, released 2026-06-18)
  - Updated tactile output to the new 24×31 matrix format.
device(s) to upgrade (1):
  WG1KXXXXXXXXXX01 (0.11.1 → 0.11.0)  ⚠ DOWNGRADE
proceed? [y/N]

wuji upgrade --sn <SN> --list shows the catalog for that device, newest first:

$ wuji upgrade --sn WG1KXXXXXXXXXX01 --list
WG1KXXXXXXXXXX01 (current: 0.11.1)
┌─────────────────┬────────────┬────────────┬──────────────────────────────────┐
│ Version         ┆ Released   ┆ Size       ┆ Notes                            │
╞═════════════════╪════════════╪════════════╪══════════════════════════════════╡
│ 0.11.1 (latest, ┆ 2026-06-24 ┆ 157.15 KiB ┆ Fixed an incorrect IMU           │
│ current)        ┆            ┆            ┆ initialization warning.          │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┤
│ 0.11.0          ┆ 2026-06-18 ┆ 155.68 KiB ┆ Updated tactile output to the    │
│                 ┆            ┆            ┆ new 24×31 matrix format.         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┤
│ 0.10.1          ┆ 2026-04-28 ┆ 152.27 KiB ┆ Fixed some known issues.         │
└─────────────────┴────────────┴────────────┴──────────────────────────────────┘

For scripting, add --json (flashing also needs --yes); the report carries the same fields as the tables above.