okx-defi-portfolio

OKX DeFi Portfolio

2 commands for viewing DeFi positions and holdings across protocols and chains.

Skill Routing

• For DeFi deposit/redeem/claim → use okx-defi-invest
• For token price/chart → use okx-dex-market
• For wallet token balances → use okx-agentic-wallet
• For DEX spot swap → use okx-agentic-wallet

Quickstart

# Get DeFi holdings overview across chains
onchainos defi positions \
  --address 0xYourWallet \
  --chains ethereum,bsc,solana

# Get detailed holdings for a specific protocol (analysisPlatformId from positions output)
onchainos defi position-detail \
  --address 0xYourWallet \
  --chain ethereum \
  --platform-id 67890

Command Index

#	Command	Description
1	onchainos defi support-chains	Get supported chains for DeFi
2	onchainos defi support-platforms	Get supported platforms for DeFi
3	onchainos defi positions --address <addr> --chains <chains>	Get user DeFi holdings overview
4	onchainos defi position-detail --address <addr> --chain <chain> --platform-id <id>	Get detailed holdings for a protocol

Chain Support

Chain	Name / Aliases	chainIndex
Ethereum	ethereum, eth	1
BSC	bsc, bnb	56
Polygon	polygon, matic	137
Arbitrum	arbitrum, arb	42161
Base	base	8453
X Layer	xlayer, okb	196
Avalanche	avalanche, avax	43114
Optimism	optimism, op	10
Fantom	fantom, ftm	250
Sui	sui	784
Tron	tron, trx	195
TON	ton	607
Linea	linea	59144
Scroll	scroll	534352
zkSync	zksync	324
Solana	solana, sol	501

Operation Flow

Step 0: Address Resolution

When the user does NOT provide a wallet address, resolve it automatically from the Agentic Wallet before running any defi command:

1. onchainos wallet status          → check if logged in, get active account
2. onchainos wallet addresses       → get addresses grouped by chain category:
                                       - XLayer addresses
                                       - EVM addresses (Ethereum, BSC, Polygon, etc.)
                                       - Solana addresses
3. Match address to target chain:
   - EVM chains → use EVM address
   - Solana     → use Solana address
   - XLayer     → use XLayer address

Rules:

• If the user provides an explicit address, use it directly — skip this step
• If wallet is not logged in, ask the user to log in first (→ okx-agentic-wallet) or provide an address manually
• If the user says "check all accounts" or "all wallets", use wallet balance --all to get all account IDs, then wallet switch <id> + wallet addresses for each account, and query positions for each
• Always confirm the resolved address with the user before proceeding if the account has multiple addresses of the same type

Step 1: Identify Intent

User says	Action
View positions / portfolio / holdings	onchainos defi positions
View detail for a protocol	onchainos defi position-detail
Redeem / claim after viewing	Suggest → use okx-defi-invest

Step 2: Collect Parameters

• Missing wallet address → resolve via Step 0 (wallet status → wallet addresses), or ask user if not logged in
• Missing chains → ask user which chains to query, or suggest common ones (ethereum, bsc, solana)
• Missing platform-id → run defi positions first to get analysisPlatformId

Step 3: Display Results

Displaying Positions Results

When displaying defi positions output, you MUST use exactly these columns in this order — no substitutions, no omissions:

#	Platform	analysisPlatformId	Chains	Positions	Value(USD)
1	Aave V3	12345	ETH,BSC	2	$120.00

Rules:

• analysisPlatformId is MANDATORY in every row — users must copy this value to run position-detail
• Never omit, hide, or replace analysisPlatformId with any other field
• Never group platforms — show every platform as its own row regardless of value size
• Raw JSON path: walletIdPlatformList[*].platformList[*] — each element is one platform row
  • platformName → Platform
  • analysisPlatformId → analysisPlatformId
  • networkBalanceList[*].network → Chains (join with comma)
  • investmentCount → Positions
  • currencyAmount → Value(USD)

Displaying Position Detail Results

Output shape: { "ok": true, "data": [ { "walletIdPlatformDetailList": [...] }, ... ] } — data is an array. Never call .get() on data directly; iterate over it as a list.

When displaying defi position-detail output, render all tokens in a single flat table with these exact columns:

Type	Asset	Amount	Value(USD)	investmentId	aggregateProductId	Token Contract	Rewards
Supply	USDT	1.002285	$1.0025	127	71931	0x970223...7	0.000080 AVAX
Pending	sAVAX	0.00000091	$0.000012	–	–	–	Platform reward

Rules:

• Each token row is one row; merge in investmentId and aggregateProductId from its parent investment entry
• investmentId is MANDATORY in every row — users need it for redeem/claim (via okx-defi-invest)
• aggregateProductId — show if present, otherwise –
• Token Contract: show the full contract address without truncation; show – if native/empty
• Rewards: show pending reward amount + symbol if present, – if none; for platform rewards show Platform reward
• Type: map investType → Supply/Borrow/Stake/Farm/Pool etc; pending rewards row uses Pending
• Health rate: show separately below the table with warning if healthRate < 1.5

V3 Pool Positions — Extra Fields

For V3 Pool positions (positionList present), show an additional section per position:

tokenId	Status	Range	tickLower	tickUpper
93828	ACTIVE	0.892 – 0.992 USDC/DAI	-33500	-30450

• tokenId: from positionList[].tokenId
• positionStatus: ACTIVE or INACTIVE
• range: from positionList[].range
• tickLower / tickUpper: from positionList[].rangeInfo.tickLower / rangeInfo.tickUpper
• These fields are critical for V3 operations (add liquidity, withdraw, collect V3 fees)

investType Reference

investType	Description
1	Save (savings/yield)
2	Pool (liquidity pool)
3	Farm (yield farming)
4	Vaults
5	Stake
6	Borrow
7	Staking
8	Locked
9	Deposit
10	Vesting

Post-execution Suggestions

Just completed	Suggest
defi positions	1. View detail → defi position-detail 2. Redeem → okx-defi-invest 3. Claim rewards → okx-defi-invest
defi position-detail	1. Redeem position → use okx-defi-invest with investmentId from table 2. Claim rewards → use okx-defi-invest 3. Add more → use okx-defi-invest
defi position-detail (V3 Pool)	1. View depth chart → defi depth-price-chart --investment-id <id> (via okx-defi-invest) 2. View price history → defi depth-price-chart --investment-id <id> --chart-type PRICE

Global Notes

• CRITICAL — Address-chain compatibility: The --address and --chains parameters must be compatible. EVM addresses (0x…) can only query EVM chains; Solana addresses (base58) can only query solana. Never mix them in a single call — the API will return error 84019 (Address format error).
  • 0x… address → only pass EVM chains: ethereum,bsc,polygon,arbitrum,base,xlayer,avalanche,optimism,fantom,linea,scroll,zksync
  • base58 address → only pass solana
  • Sui address → only pass sui
  • Tron address (T…) → only pass tron
  • TON address → only pass ton
  • If the user wants positions across both EVM and Solana, make two separate calls with the respective addresses
• defi positions uses --chains (plural, comma-separated, e.g. --chains ethereum,bsc) — do NOT use --chain
• defi position-detail uses --chain (singular) — do NOT use --chains
• The wallet address parameter is --address for both commands
• position-detail requires analysisPlatformId from positions output as --platform-id
• The CLI resolves chain names automatically (ethereum → 1, bsc → 56, solana → 501)