skillZs
★ LIVE SKILL TAGS ★
>>> LIVE SKILLS INDEX <<<
* OPEN SOURCE *
NO LOGIN, NO TRACKING
※ REAL INSTALL DATA ※
← back to all skills
matlab/matlab-agentic-toolkit66 installs

matlab-simulate-bluetooth-network

Simulate Bluetooth system-level networks using the Bluetooth Toolbox. Use this skill for any Bluetooth topology: BLE ACL (Asynchronous Connection-Less) data connections, CIS (Connected Isochronous Stream) and LE Audio for stereo speakers or hearing aids, BLE GAP (Generic Access Profile) connection establishment with advertising and scanning, Classic BR/EDR piconets with ACL data and SCO (Synchronous Connection-Oriented) voice links, and BLE+BR/EDR coexistence with adaptive frequency hopping. Covers bluetoothLENode, bluetoothNode, bluetoothLEConnectionConfig, bluetoothLECISConfig, bluetoothLEGAPConfig, bluetoothConnectionConfig, configureConnection, kpi (), updateChannelList, and all Bluetooth statistics.

How do I install this agent skill?

npx skills add https://github.com/matlab/matlab-agentic-toolkit --skill matlab-simulate-bluetooth-network
view source ↗

Is this agent skill safe to install?

  • Gen Agent Trust Hubpass

    This skill provides comprehensive instructions and code templates for simulating Bluetooth networks (BLE, Classic, and LE Audio) using the MATLAB Bluetooth Toolbox. No malicious patterns were detected, though the skill exhibits an architectural surface for indirect prompt injection inherent to code-generation tools.

  • Socketpass

    No alerts

  • Snykpass

    Risk: LOW · No issues

What does this agent skill do?

Bluetooth System-Level Simulation

Entry point for all Bluetooth system-level simulation. All Bluetooth simulations use sim = wirelessNetworkSimulator.init and follow the workflow defined in matlab-simulate-wireless-network (simulator init, traffic, mobility, instrumentation, addNodes, run).

When to Use

  • BLE ACL point-to-point or star network connections
  • LE Audio unicast with CIS/CIG (stereo speakers, hearing aids)
  • BLE GAP connection establishment (advertising, scanning, connection timing)
  • Classic BR/EDR piconets with ACL data or SCO voice
  • BLE + BR/EDR coexistence with adaptive frequency hopping
  • Any simulation using bluetoothLENode, bluetoothNode

When Not to Use

  • Non-Bluetooth wireless simulations (use matlab-simulate-wireless-network instead)
  • PHY-layer or link level Bluetooth waveform generation, receiver analysis or BER analysis
  • Generic simulator setup, traffic models, or mobility (use matlab-simulate-wireless-network)

Scenario → Reference Routing

ScenarioReference
BLE realistic connection setup (advertising, scanning, GAP)references/ble-gap-connection.md
BLE point-to-point data, star network, ACL connectionsreferences/ble-connection.md
LE Audio unicast (stereo speakers, hearing aids, CIS/CIG)references/ble-cis.md
Classic Bluetooth earbuds, SCO voice, ACL datareferences/bluetooth-bredr.md
BLE + BR/EDR coexistence, adaptive frequency hoppingreferences/bluetooth-coexistence.md
Capture and visualization (PCAP, IQ, event tracing, traffic viewer)See matlab-simulate-wireless-network skill

Node Roles

  • BLE (ACL, CIS): bluetoothLENode("central"), bluetoothLENode("peripheral")
  • BR/EDR: bluetoothNode("central"), bluetoothNode("peripheral") — max 7 peripherals per central

Traffic Attachment Rules

addTrafficSource(sourceNode, traffic, ...):

  • ACL/CIS/BR/EDR: DestinationNode=peer required. CIS also needs CISConfig=cfgCISOut.
  • BR/EDR SCO: No traffic call — implicit via SCOPacketType in connection config.

kpi() Availability

Topology"throughput""latency""PLR" / "PDR"Layer
BLE ACLLL onlyApp onlyBoth LL and App"LL" or "App"
BLE CISLL onlyApp onlyBoth LL and App"LL" or "App"
BR/EDRBaseband—Baseband"Baseband"

Connection/Configuration Setup

TopologyConfig ObjectFunctionNotes
BLE ACLbluetoothLEConnectionConfigconfigureConnection(cfg, central, peripheral)Per-peripheral in loop; unique AccessAddress per connection
BLE CISbluetoothLEConnectionConfig + bluetoothLECISConfig[~, cfgCISOut] = configureConnection(cfg, central, peripheral, CISConfig=cfgCIS)Pass cfgCISOut to addTrafficSource(..., CISConfig=cfgCISOut)
BR/EDRbluetoothConnectionConfigconfigureConnection(cfg, central, peripherals)Single call with vector of peripherals

Common Mistakes

  • bluetoothNode for BLE (or vice versa): BR/EDR = bluetoothNode, BLE = bluetoothLENode
  • Wrong kpi Layer: BLE throughput → "LL", BLE latency → "App", BR/EDR → "Baseband" only
  • Properties locked after run(): Node/connection properties cannot change mid-sim. Use updateChannelList for mid-sim channel updates.
  • configureConnection with peripheral vector for BLE: Must call per-peripheral in loop (BR/EDR accepts vector)
  • Unique AccessAddress per connection: Each BLE connection on same central needs different AccessAddress
  • DataRate in Kbps: DataRate=100 means 100 Kbps, not 100 bps
  • GeneratePacket=true is not valid: Not applicable for network-level simulation. Use OnTime=Inf for continuous traffic.
<!-- Copyright 2026 The MathWorks, Inc. -->

Add the canonical catalog link to the repository README so users can inspect current installs and available audits. The publishing guide covers the complete discovery path.

<a href="https://skillzs.dev/skills/matlab/matlab-agentic-toolkit/matlab-simulate-bluetooth-network">View matlab-simulate-bluetooth-network on skillZs</a>